I finally have the NeoGeo and Xmen Vs Street Fighter cabinets ready to go. After getting the control panels sandblasted, painted, cutting new Lexan, and getting new overlays they’re finally back together. It all took far longer than I wanted it to, but that was just due to time constraints. Overall they look fantastic. There is a small issue with the NeoGeo, mainly since I left the overlay vinyl attached to the original backing the pressure the Lexan puts on it causes some noticeable marking. I think that may just be trapped moisture that will go away. If not, I’ll put the vinyl onto cardstock backing and see how that goes.
Finally cleaned the Blast City today. I figure since I’m going to be out of town this weekend it’ll have plenty of time to dry, and when I get back I can put everything together.
Simple Green is some seriously wonderful stuff.
I’m still trying to figure out a good way to do pictures on here. Picasa web albums suck, and imgur doesn’t embed very well. So here’s a bunch of picturesContinue reading
Well, it’s time to start cleaning the Blast City. I decided to start with some of the simple things. The rear marquee, monitor, power supply, bezel, and IO board. Ironically the Monitor and PSU are typically the dirtiest parts of any cabinet.
The monitor was a pain in the ass to get it. 29 inch crt = very heavy. I managed to get it out, discharge it, and only contract 5 or 6 diseases. This thing was filthy. See below…
Right before going to GXL (and I mean immediately before) I finished building a new stick! While at Jasen’s I had picked up a new Panzer body. This stick I had decided to padhack an xbone PCB and go with Seimitsu buttons and a Seimitsu joystick.
I did it, I got a blast city! I drove to Jasen’s in Herndon and picked it up today. Filthy as hell, I’ll post pictures as I work on it. I’ve already started cleaning the control panel. But don’t expect much. Here’s a few:
Yeah, the versus city CP is in bad shape, but don’tworry. I bought a repro from Jasen, as well as hardware for a new Panzer! Pics and info to come.
I do have some good plans for it as well. I’ve picked up a Naomi, NetDimm, SunPSU, and some 360 Pads. I plan on running a Naomi and 360 in the cabinet. I’m modded up some padhacks and I’m thinking I’ll enclose them in a hobby box with a jamma fingerboard for easy swapping. More as that progresses..