Finally had a chance to make a cap list for the Toei Tc-a292s. The cap map is still SUPER rough. I need to overlay it onto a picture of a board. Right now it’s just stuff I’ve drawn on a legal pad 😛

 

Chassis Cap List:

Location
Voltage
UF
Bipolar?
c10 50 1
c30 50 1
c34 50 1
c36 50 1
c63 50 1 x
c76 50 1
c77 50 1
c12 50 2.2
c13 50 2.2
c14 50 2.2
C88 50 2.2 X
c89 50 2.2 X
c28 50 4.7
c32 50 4.7
c94 50 4.7 x
c19 16 10
c37 16 10
c45 16 10 x
c53 50 10
c87 50 10
c29 16 22
c5 16 22
c52 250 22
c52 250 22
c7 16 22
c83 16 22
c9 16 22
c66 16 33
c71 15 33
c102 160 47
c111 100 47
c3 16 47
c42 35 47
c44 35 47
c61 35 47
c67 35 47
c84 35 47
c85 35 47
c90 35 47
c1 16 100
c112 16 100
c124 16 100
c126 16 100
c55 16 100
c62 250 100
c68 50 100
c75 16 220
c78 16 330
c69 35 470
c96 16 470
c97 200 470
c115 180 680
c104 25 1000
c105 16 1000
c92 35 1000
c70 25 2200

Neckboard:

Location
Voltage
UF
Bipolar?
c402 16 10
c404 250 22
c401 16 10
c403 16 10

Small Board:

Location
Voltage
UF
Bipolar?
C1 16 100
c2 35 47

 

Or, if you prefer a sheet: Click Here

As for the super duper rough map, that is available below. I’ll update this when I have a pretty version

CapMapFinal

12244256_1519812681662359_7059024086860143381_o

A few months ago with my Vewlix cabs I bought an MVS U4 29 Inch. I’ve had practically no time to work on it, given that I moved for a new job and got inundated with Macro stuff. Finally I’m tearing this thing apart and working on it. It was FILTHY. It needs a bit of work. Here’s what I have planned:

  • Sandblasting the CP
  • Replacing all controls
  • Recap the monitor
  • Total wash
  • Future repainting
  • New side art
  • New front door. May have to make one if I can’t find one

Anyways. Here’s a quick pic dump of the cab. Unfortunately I didn’t take a ton of photos of it dirty. But here are the pre wash and post wash pics

Before:

After:

 

My current issue is trying to track down a cap kit for this monitor ( The tube is a Toshiba A68KJU96X01. Chassis is a Toei Tc-a292s). I can’t find much of anything about it online. So I may have to resort to looking at each cap individually and purchasing the kit, then making a cap map for anyone else who may need a cap kit. This is my plan, but I may not be able to do this until next weekend at the earliest.

I modified a 25 inch CP overlay to (hopefully) fit the 29 inch I have. Since I couldn’t find a 29 incher. You can find it right here, if you need a 29 inch overlay. Though I’ll update this once it’s on and tested. I’m also trying to track down the artwork for the 1p and 2p start buttons, that was above the overlay. Mine broke into pieces when I took the CP apart.