A few weeks ago I had the urge to get a backwards compatible PS3. I’ve had a few in the past, but they seem to eventually die of YLOD. I decided to pick a YLOD console up off of ebay for $30 and fix it. I did the standard reflow as a repair, as well as replaced the thermal paste on the IHS for the GPU and Cell processor in some crazy dream that it will keep going if I do that.

In addition to that, I also decided to make an adjustable fan mod. I did this fairly simply, and you can see the photos below on how to do it yourself if you’d like.

Initially I was just going to mount a POT to the front and use it for fan adjustment, I eventually decided it might be beneficial to also put a switch in so I can switch between the fan being controlled by the PS3 and the fan just being controlled by the POT. Keep in mind, this POT isn’t really the perfect rating (250k I believe), but it works fairly well and I had it on hand. As well as a random DPDT switch. The mounts aren’t perfect, but I’ll clean them up in a bit, this is just a quick hour long project.



Here’s a dumb video:



This is mostly for reference as I’m starting to look into modding my Hori VLX! But if anyone needs it:

Pin Spacing: 2.54mm or .100″

Connector Dimensions: 38.15mm x 5.09mm


VLX Pinout

























For clarification, the pin layout is as follows!











PS: I picked up an astro city today. So I’m going to start posting about that soon 😀