A few months ago with my Vewlix cabs I bought an MVS U4 29 Inch. I’ve had practically no time to work on it, given that I moved for a new job and got inundated with Macro stuff. Finally I’m tearing this thing apart and working on it. It was FILTHY. It needs a bit of work. Here’s what I have planned:

• Sandblasting the CP
• Replacing all controls
• Recap the monitor
• Total wash
• Future repainting
• New side art
• New front door. May have to make one if I can’t find one

Anyways. Here’s a quick pic dump of the cab. Unfortunately I didn’t take a ton of photos of it dirty. But here are the pre wash and post wash pics

Before:

After:

 

My current issue is trying to track down a cap kit for this monitor ( The tube is a Toshiba A68KJU96X01. Chassis is a Toei Tc-a292s). I can’t find much of anything about it online. So I may have to resort to looking at each cap individually and purchasing the kit, then making a cap map for anyone else who may need a cap kit. This is my plan, but I may not be able to do this until next weekend at the earliest.

I modified a 25 inch CP overlay to (hopefully) fit the 29 inch I have. Since I couldn’t find a 29 incher. You can find it right here, if you need a 29 inch overlay. Though I’ll update this once it’s on and tested. I’m also trying to track down the artwork for the 1p and 2p start buttons, that was above the overlay. Mine broke into pieces when I took the CP apart.